iQ
Series Ultrasonic Press System LE User's Manual
The PRE WELD menu is shown in Figure 5-14. The se-
lected mode is highlighted (Manual Press). To change to
a different mode, move arrow to desired mode, and press
ENTER.
Trigger menu with Maintained trigger method selected is
shown in Figure 5-15.
The menu display seen in Figure 5-16 at the right shows the
display when ENTER was pressed with the arrow pointing
to type, but the press does not support distance.
The menu in Figure 5-17 to the right shows the display
when ENTER was pressed with the arrow pointing to type
with a press that supports distance.
Page 62
Continued from Previous Page
Figure 5-14 Pre Weld Menu, Manual Press Mode
Figure 5-15 Pre Weld Menu, Maintained Trigger
Figure 5-16 Pre Weld Menu, Press Does Not Support
Figure 5-17 Pre Weld Menu, Press Supports Distance
MODE
AUTOMATED PROBE
iQ CONTROLLED PROBE
MANUAL PRESS
PRE-TRIGGER
AUTOMATED PRESS
TRIGGER
PRE
POST
AMP
WELD
WELD
WELD
MODE
TYPE
MAX TIME
PRE-TRIGGER
TRIGGER
PRE
POST
AMP
WELD
WELD
WELD
Selected
MODE
MAINTAINED
MOMENTARY
POWER
PRE-TRIGGER
TRIGGER
PRESS ENTER TO SELECT
PRE
POST
AMP
WELD
WELD
WELD
Distance
MODE
MAINTAINED
MOMENTARY
WHEN MOTION STOPS
PRE-TRIGGER
POWER
POSITION
TRIGGER
PRE
POST
AMP
WELD
WELD
WELD
Dukane Manual Part No. 403-586-02
ONLINE
PRESS ENTER TO SELECT
LIMITS
SETUPS
LIVE
OPERATE
ONLINE
MAINTAINED
0.000s
PRESS ENTER TO SELECT
LIMITS
SETUPS
LIVE
OPERATE
ONLINE
LIMITS
LIVE
SETUPS
OPERATE
ONLINE
PRESS ENTER TO SELECT
LIMITS
SETUPS
OPERATE
LIVE
Continued