iQ
Series Ultrasonic Press System LE User's Manual
LIVE
When the LIVE hot key is pressed, the display as shown
in Figure 5-50 to the right is seen.
This is also called the Live Data screen.
The screen shows the current value of the parameters
shown. These values are shown regardless of whether the
generator is in cycle or not.
If distance is not supported, it would not be displayed.
IN CYCLE
When the LIVE hot key has been pressed, and the genera-
tor is in cycle, the screen shown in Figure 5-51 is dis-
played.
The screen shows the current value of the parameters
shown.
If DISTANCE is not supported, it would not be displayed.
TEST
When the TEST soft key has been pressed, and the
generator is online, the screen shown in Figure 5-52 is
displayed.
The screen shows the current value of the parameters
shown.
If DISTANCE is not supported, it would not be displayed.
Page 74
AUTO 01
SETUP #01
AMPLITUDE
POWER
OPERATING FREQUENCY
DISTANCE
PRE
AMP
WELD
WELD
Figure 5-50 Live Data Screen
AUTO 01
AMPLITUDE
POWER
OPERATING FREQUENCY
DISTANCE
PRE
AMP
WELD
WELD
Figure 5-51 In Cycle Screen
AUTO 01
AMPLITUDE
POWER
OPERATING FREQUENCY
DISTANCE
PRE
AMP
WELD
WELD
Figure 5-52 Test Screen
Dukane Manual Part No. 403-586-02
ONLINE
100%
19,900Hz
0.0000in
POST
LIMITS
SETUPS
OPERATE
WELD
IN CYCLE
ONLINE
SETUP #01
100%
19,900Hz
0.0000in
POST
LIMITS
SETUPS
OPERATE
WELD
ONLINE
TEST
SETUP #01
100%
19,900Hz
0.0000in
POST
LIMITS
SETUPS
OPERATE
WELD
0W
LIVE
0W
LIVE
0W
LIVE