Setup Identification
Setup identification can be seen at the top of the screen
as shown in the figure below.
The example shown in Figure 4-10 illustrates that setup
control is by automation (Auto 01).
Use iQ 01 if the setup selec-
tion is controlled by gen-
erator. Use Auto 01 when
controlled by automation.
PROCESS
Figure 4-10
Main Menu Detail - Setup Identification
Dukane Manual Part No. 403-586-02
AUTO 01
SETUP #01
PART COUNT:
WELD TIME :
ENERGY:
PEAK POWER :
DISTANCE
STATISTICS
PRE
AMP
WELD
WELD
This is the name of the setup be-
ing edited if in Automation mode.
Otherwise, the setup shown is
the one in use.
POST
LIMITS
SETUPS
OPERATE
WELD
ONLINE
0
0.000s
0J
0 W
0in
LIVE
Section 4 - Controls
Page 45