Placing the Generator when Used in
an Active Seismic Region
If the iQ generator is to be used in an active seismic region,
secure the unit by rack-mounting it or by securing the unit
to a benchtop.
Rack- Mounting
Install the four brackets from Dukane's rack-mount kit to
the generator. See Table 3-I, and Figure 3-3 (showing a
low profile unit) below.
Mount the generator to a 19-inch equipment rack.
ALLOW 5"
BOTH
SIDES
FOR
COOLING
0.12
[3.0]
IN
[mm]
Figure 3-3
Rack Mounting iQ Generator - Representative Low-Profile Model Shown
Dukane Manual Part No. 403-586-02
ALLOW 3" IN BACK FOR CABLES
System Type
High Profile
Low Profile
Table 3- I
Rack Mount Bracket Part Numbers
The figure shows how a
typical iQ generator is rack
ALLOW 5"
BOTH
SIDES
mounted. Your generator's
FOR
COOLING
appearance may be different
from what is shown here.
0.25 X 0.50 SLOT
(2 PLCS)
OPTIONAL RACK
MOUNT BRACKETS
147-4720
Section 3 - Installation
Dukane Part Number
147-4721
147-4720
NOTE
Continued
Page 15