SETUPS
Setup Control
The SETUPS menu seen in Figure 5-39, shows that iQ
SYSTEM is the default setup control setting for this menu.
SELECT SETUP is the bottom soft key in this case.
If AUTOMATION is selected, the bottom soft key would
be: EDIT SETUP.
Press SELECT SETUP, and a screen similar to the one
shown in Figure 5-40 to the right is displayed.
>
When the
is next to the desired setup, press the SELECT
SETUP soft key, or the ENTER key.
Then, the previous screen will be displayed.
Pressing CANCEL would display the previous screen
without any setup being chosen.
Name Setup
The menu shown to the right in Figure 5-41 is displayed
>
when the
is moved to NAME SETUP.
The name of the current setup that is being edited (depen-
dent on SETUP CONTROL) is highlighted and ready
for editing.
Pressing ENTER saves the name.
Pressing ERASE NAME changes the name back to the
default. (In this example, Setup #1).
When the setup name is not highlighted, there is a box
around it. This indicates that pressing the soft key next to
the box allows the box to be edited.
Dukane Manual Part No. 403-586-02
>
IQ SYSTEM
AUTOMATION
SELECT SETUP
PRE
AMP
WELD
WELD
Figure 5-39 Setups Menu, Default Display
SELECT SETUP
PRE
AMP
WELD
WELD
Figure 5-40 Setups Menu, Select Setup
SETUP NAME
>
SETUP #1
ERASE NAME
PRE
AMP
WELD
WELD
Figure 5-41 Setups Menu, Name Setup
A total of 8 (eight) setups can be made.
Section 5 - Operation
ONLINE
SETUP CONTROL
NAME SETUP
COPY SETUP
ERASE SETUP
POST
LIMITS
SETUPS
OPERATE
WELD
>
ONLINE
# 1 - SETUP# 1
# 2 - SETUP# 2
# 3 - SETUP# 3
# 4 - SETUP# 4
# 5 - SETUP# 5
# 6 - SETUP# 6
# 7 - SETUP# 7
POST
LIMITS
SETUPS
OPERATE
WELD
ONLINE
SETUP CONTROL
NAME SETUP
COPY SETUP
ERASE SETUP
POST
LIMITS
SETUPS
OPERATE
WELD
NOTE
Continued
Page 69
LIVE
LIVE
LIVE