Dukane iQ Series Operating Instructions
Thruster from a plc ultrasonic welders
Hide thumbs
Also See for iQ Series:
- User manual (178 pages) ,
- Quick start manual (30 pages) ,
- Application note (16 pages)
Related Manuals for Dukane iQ Series
Summary of Contents for Dukane iQ Series
- Page 1 DUKANE APPLICATION NOTE AN532 Series ULTRASONIC WELDING SYSTEM 43Q220-P-301 OPERATING A DUKANE THRUSTER FROM A PLC Dukane Ultrasonic Welders AN532 (Rev. 00) © Dukane 2021. All Rights Reserved. Page 1 of 5...
- Page 2 It is recommended that an E-stop be inserted between the 24 volt power supply and the cable connection. This will turn both valves off, allowing the thruster to go to a neutral state. The 24 volt power supply should be capable of supplying 0.5 amps or more. AN532 (Rev. 00) © Dukane 2021. All Rights Reserved. Page 2 of 5...
- Page 3 OPTIONAL TRIGGER SWITCH AND TOP OF STROKE SIGNALS OPTIONAL DUAL PRESSURE VALVE NOTE: These signals are not necessary for operation. These are only provided as optional if additional functionality is required. AN532 (Rev. 00) © Dukane 2021. All Rights Reserved. Page 3 of 5...
- Page 4 Disclaimer: Dukane IAS assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein.