List Of Setting Items - Omron EQUO Series User Manual

4.2.1 List of Setting Items

The following list shows the setting items available in FUN mode.
Display Item
CYCLE
UNIT
INIT
NN.PLS
NN.SCL
(*1)
NN.SET
(DISP)
NN.AVE
NN.GAS
RESTR
ETC
(DISP)
BCKUP
CLOCK
(DISP)
Display
(*1)
(*1)
(*1)
(*1)
YEAR
MONTH
DAY
TIME
4. Setting (Air Flow Station Operation)
Setting Item
Data recording 1s (sec.)/2s/5s/10s/20s/
interval 30s/1m (min.)
Number of 1 to 8
sensor units
connected
Initialize Air Initialization starts at a long
Flow Station press
settings SET/REC/STOP key. The
unit
MODE key is pressed twice
and THR mode is exited
after the "DONE" indication
appears.
Pulse setting 1.0/10.0/100.0/1000.0
(L/Pulse)
Flow rate 0 to 1000
full-scale value
Frequency of 1/2/4/8/16/32 (times)
averaging
Measurement Air / N
target gas
Read setting The unit reads setting data
data from the from a pre-inserted SD
SD memory memory card at a long
card. press
SET/REC/STOP key and
uses the data to set itself.
The unit restarts when the
MODE key is pressed twice
and THR mode is exited
after the "DONE" indication
appears.
Write setting The unit saves the setting
data to the SD data in a pre-inserted SD
memory card. memory card, at a long
press
SET/REC/STOP key.
Year Year setting
Month Month setting
Day Day setting
Hour/Minute Hour/minute setting
4-3
Setting Value
of the
restarts when the
(*2)
2
of the
of the
Factory
Default
1s
1
-
1.0
1000
16
(*4)
Air
-
-
Not
initialized
by INIT.