WEG SSW-06.0205 User Manual page 96

[Factory Setting]
Parameter
P218
LCD Display
Contrast Adjustment
P220 (1)
LOCAL/REMOTE
Source Selection
(1)
P229
Command Selection
-Local Condition
(1)
P230
Command Selection
-Remote Condition
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Range
Unit Description / Notes
 The Keypad (HMI) can not be operated while it is executing the read
or write procedures.
NOTES!
1) If the Keypad (HMI) has saved parameters of a "different version"
2) This function changes all SSW-06 parameters to the new values.
 It allows the adjustment of the LCD Display contrast, as a function of
0 to 150
the viewing angle. Increase/decrease the parameter content untill the
[ 127 ]
best contrast is obtained.
-
 Defines the command source that will select between the LOCAL /
0 to 8
REMOTE selection condition.
[ 2 ]
-
 Default condition = when Soft-Starter SSW-06 is powered-up (start-up)
 In the factory default setting, the key
select Local or Remote Mode. When powered up, the Soft-Starter
SSW-06 starts in Local mode.
 Defines the origin of the Soft-Starter SSW-06 enable/disable commands.
0 to 3
[ 0=HMI ]
-
0 to 3
[ 0=Terminals ]
-
CHAPTER 6 - DETAILED PARAMETER DESCRIPTION
than that installed in Soft-Starter SSW-06 to which it is trying
to copy the parameters, the operation will not be executed and
Soft-Starter SSW-06 will display error E10 (Error: Copy Function
not permitted). "Different Version" are those that are different in
"x" or "y", supposing that the numbering of Software Versions is
described as Vx.yz.
P220 Local/Remote Selection
0 Always Local Condition
1 Always Remote Condition
2 Key of the Keypad (HMI)
3 Key of the Keypad (HMI)
4 Digital Inputs DI4 ... DI6
5 Serial Communication
6 Serial Communication
7 Fieldbus Communication
8 Fieldbus Communication
Table 6.20 - LOCAL/REMOTE Selection
P229/P230
0
1
2
3 Fieldbus Communication (DevideNet or Profibus DP)
Table 6.21 - Command Selection
Default Condition
-
-
Local
Remote
(P266 ... P268)
Local
Remote
Local
Remote
of the Keypad (HMI) will
Origin of the Commands
Keypad keys (HMI)
Digital Input DIx
Serial Communication
97