WEG SSW-06.0205 User Manual page 93

CHAPTER 6 - DETAILED PARAMETER DESCRIPTION
Parameter
(1)
P204
Load/Save
Parameter
94
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Range
[Factory Setting]
Unit Description / Notes
 The table below shows the relation between the adopted starting control
type and the automatically selected stop control type.
0 to 11
 Parameters with note (2) indicated are not changed when Factory
[ 0 ]
Settings are loaded through P204 = 5.
-
 To load User Parameter 1 (P204=7) and/or User 2 (P204=8) in the
operation area of Soft-Starter SSW-06, it is necessary for User Memory
1 and/or User Memory 2 to be been saved previously (P204=10 and/or
P204=11).
START
Voltage Ramp X
Current Limit X
Current Ramp X
Pump Control
Torque Control
Table 6.16 – Stop/Start Operation
Current
P204=5
Parameter of
Soft-Starter
SSW-06
Figure 6.11 - Parameter Transfer
X
X
User
Memory 1
Factory
Setting
(WEG
Standard)
User
Memory 2