WEG SSW-06.0205 User Manual page 74

ACTION
Press the key to save the
selected option and exit the
programming mode
Press the key and maintain it
depressed to find P003
Press the key
Press the key
To Stop press the key
To restart press the key
Press the key
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
HMI LED DISPLAY
HMI LCD DISPLAY
Type of Control
P202=Volt. Ramp.
Motor Current
P003=0A
Motor Current
P003=0A
Motor Current
P003=346A
Motor Current
P003=90A
SoftStarter
ready
Motor Current
P003=346A
Motor Current
P003=90A
CHAPTER 5 - START-UP
DESCRIPTION
Exit the programming mode
Motor Current (A)
This is only a Read Parameter
Motor accelerates and a high value of
current is reached.
Then the current decreases down to a
value required by the load.
Motor decelerates until stopping by
coast to rest. Time to stop depends on
load inertia and friction.
Motor accelerates and a high value of
current is reached.
Then the current decreases up to a
value required by the load.
75