WEG SSW-06.0205 User Manual page 59

CHAPTER 4 - KEYPAD (HMI) OPERATION
Functions of the LCD Display:
The LCD Display shows the parameter number and its value
simultaneously, without the need of pressing the key. It also
provides a brief description of each parameter and also the units
(A, Hz, V, s, %) when necessary. It also provides a brief description of
the fault code and inverter status.
Local and Remote Led Functions:
Soft-Starter in Local Mode:
Green Led on and Red Led Off.
Soft-Starter in Remote Mode:
Green Led Off and Red Led on.
Direction of Rotation (FWD/REV) LED Functions:
Not implemented in this Software Version
Speed
Forward Forward
Reverse
0
FWD / REV Command (key)
FLASHING
ON
OFF
Figure 4.2 - Direction of Rotation (FWD / REV) LED´s
Operation of the Man Machine Interface (MMI) keys:
Starts (Enable) the motor (start).
Stops (Disables) the motor (stop).
Also resets the Soft-Starter after a fault has occurred.
Toggles the LED display between the parameter number and its value
(position/content).
Increases the number of the parameter or the value of the parameter.
Decreases the number of the parameter or the value of the parameter.
Reverses the direction of motor rotation between Forward/Reverse
Toggles between this LOCAL or REMOTE modes of operation.
60
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com