WEG SSW-06.0205 User Manual page 68

ACTION
Use the keys and
programming Soft-Starter connection
type to motor
Press the key to save the
selected option and exit the
programming mode
Press the key to go to the next
parameter
Press the Key to enter the
programming mode
Use the keys and
select the start control type
Press the key to save the
selected option and exit the
programming mode
Press the key to go to the next
parameter
Press the key to enter
programming mode
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
HMI LED DISPLAY
HMI LCD DISPLAY
for
Delta Inside
P150=OFF
Delta Inside
P150=OFF
Type of Control
P202= Volt.Ramp.
Type of Control
P20 2= Volt.Ramp.
to
Type of Control
P20 2= Volt.Ramp.
Type of Control
P20 2= Volt.Ramp.
Init. Volt Start
P101=30%
Init. Volt Start
P101=30%
CHAPTER 5 - START-UP
DESCRIPTION
Soft-Starter connection type to motor:
standard 3 wires
(Maintained the already existing
value)
Exit the programming mode
Selection of the start control type:
0=Voltage ramp
1=Current Limit
2=Pump Control
3=Torque Control
4=Current Ramp
Enter the programming mode.
Selected start control type:
Voltage ramp
(Maintained the already existing
value)
Exit the programming mode
Initial start voltage by voltage ramp:
(25 to 90)%Un
Enter the programming mode.
69