WEG SSW-06.0205 User Manual page 153

CHAPTER 10 - TECHNICAL SPECIFICATIONS
10.4 ELECTRONICS/PROGRAMMING DATA (cont.)
Safety Protections
Keypad (HMI) HMI-SSW06
154
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
 Overcurrent;
 Undercurrent;
 Overvoltage;
 Undervoltage;
 Phase loss;
 Reversed phase sequence;
 Overtemperature of heat sink;
 Motor overload;
 External fault;
 Open By-pass contact (when Soft-Starter is fitted with internal By-pass);
 Overcurrent before By-pass (when Soft-Starter is fitted with internal By-pass);
 CPU Error;
 Keypad (HMI) communication error.
 Programming error;
 8 keys: enable / disable, Increment, Decrement, Direction of Rotation, Jog, Local/
Remote and Programming;
 LCD-Display, 2 lines x 16 columns and 7 segments
 4 digits LED display
 Led's for indication of the direction of rotation and indication on the Mode of
Operation (LOCAL/REMOTE)
 Permits access/changing of all parameter;
 External mounting is possible, cables up to 5m (16.40ft) are available.