WEG SSW-06.0205 User Manual page 27

Height
H
Model
mm
(in)
SSW-06.0085 370
SSW-06.0130 (14.57)
SSW-06.0170 440
SSW-06.0205 (17.32)
SSW-06.0255 550
SSW-06.0312 (21.65)
SSW-06.0365
SSW06.0412 650
SSW06.0480 (25.59)
SSW06.0604
SSW06.0670 795
SSW06.0820 (31.3)
SSW06.0950 894.5
(35.22)
SSW06.1100 1234.8
SSW06.1400 (48.61)
3.1.3 Positioning / Fixing
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Width Depth.
A
W D
mm
mm mm
(in)
(in) (in)
132 244 75
(5.20) (9.61) (2.95)
223 278 150
(8.78) (10.94) (5.91)
370 311 200
(14.57) (12.24) (7.87)
369.5 347 200
(14.55) (13.67) (7.87)
540 357.12 250
(21.26) (14.06) (9.84)
568.2 345.15 400
(22.37) (13.59) (15.75)
685 432.94 500
(26.97) (17.04) (19.68)
Table 3.1 - Installation Data with dimensions in mm (in)
At least the spaces around the soft-starter must be left open for the
installation of the SSW-06 Soft-Starter, according to Figure 3.2, as
follows. The dimensions of each space are described in table 3.2.
Install the Soft-Starter SSW-06 in the vertical position according to the
following recommendations:
1) Install the SSW-06 Soft-Starter on a flat surface;
2) Do not place heat sensitive components on top of the SSW-06 Soft-
Starter;
ATTENTION!
If the Soft-Starters are installed one next to the other, use minimum
distance B.
When a Soft-Starter is installed on top of another, use minimum distance
A+C and avoid to the Soft-Starter above the hot air that comes from the
Soft-Starter below.
ATTENTION!
Foresee independent conduits or electroducts for physically separating
the signal, control and power conductors (see item 3.2, electrical
installation).
CHAPTER 3 - INSTALLATION AND CONNECTION
B C D2
mm mm mm
(in) (in) (in)
350 28.5 8.5
(13.78) (1.12) (0.33)
425 36.5 5.9
(16.73) (1.44) (0.23)
527.5 84.8 10
(20.77) (3.34) (0.39)
627.5 84.75 11.25
(24.7) (3.33) (0.44)
775 145 10
(30.51) (5.71) (0.39)
810 84.1 10
(31.89) (3.31) (0.39)
1110 92.5 15
(43.7) (3.64) (0.59)
Mounting
Weight
sc re w
Kg
mm
(lb)
(in)
M5 8.5
(1/4") (18.74)
M6 18.5
(1/4") (40.79)
M6 39.5
(1/4") (87.08)
M6 55.0
(1/4") (121.27)
M8 120.0
(5/16") (264.60)
M8 107.0
(5/16") (235.93)
M8 217.5
(5/16") (479.59)
Degree of
Protection
IP00
27