Safety Information; General Safety Instructions - Siemens SIMATIC RF600 System Manual

Safety Information

2.1

General safety instructions

Please observe the safety instructions on the back cover of this documentation.
SIMATIC RFID products comply with the salient safety specifications to VDE/DIN, IEC, EN,
UL and CSA. If you have questions about the admissibility of the installation in the
designated environment, please contact your service representative.
CAUTION
Alterations to the devices are not permitted.
Failure to observe this requirement shall constitute a revocation of the radio equipment
approval, CE approval and manufacturer's warranty.
Repairs
Repairs may only be carried out by authorized qualified personnel.
Unauthorized opening of and improper repairs to the device may result in substantial
damage to equipment or risk of personal injury to the user.
System expansion
Only install system expansion devices designed for this device. If you install other upgrades,
you may damage the system or violate the safety requirements and regulations for radio
frequency interference suppression. Contact your technical support team or where you
purchased your device to find out which system expansion devices may safely be installed.
CAUTION
If you cause system defects by improperly installing or exchanging system expansion
devices, the warranty becomes void.
SIMATIC RF600
System Manual, 10/2009, J31069-D0171-U001-A8-7618
CAUTION
WARNING
2
15