Operating
8.2 Reading / changing parameters
8.1.6
Reading the diagnostic values
One of the main views can be configured to show six diagnostic values.
8.2
Reading / changing parameters
8.2.1
Parameter view
The parameter view presents the menu structure of the device. All menu items are uniquely
identified with a menu item number.
Level 1 of the parameter view (entered from the operation view) is standardized for all Siemens
Process Instrumentation devices and covers the following groups:
• Quick start (menu): Lists the most important parameters for quick configuration of the
device. All parameters in this view can be found elsewhere in the menu.
• Setup (menu): Contains all parameters which are needed to configure the device.
• Maintenance and diagnostics (menu): Contains parameters which affect the product
behavior regarding maintenance, diagnostics and service.
Examples: Verification, failure prediction, device health, data logging, alarm logging, report,
condition, monitoring, tests, etc.
50
Operating Instructions, 11/2021, A5E50387341-AA
SITRANS FST090