Alarm acknowledgement
There are two ways to have the alarms removed from the alarm list.
● Manual: The alarm remains in the alarm list until the alarm is manually acknowledged (ack.).
Before the alarm can be acknowledged, the cause must be eliminated. Press
the detailed alarm information. Press
acknowledgement is shown in the history log.
● Auto: The alarm is removed from the alarm list when the cause is removed (going)
7.3.5
Reading the diagnostic values
One of the main views can be configured to show six diagnostic values.
7.3.6
Reading / changing parameters
7.3.6.1
Parameter view introduction
Depending on your access level, you can read the current value and/or edit the value of the
selected parameter.
7.3.7
Alphanumeric parameters
Read only
The view shows the set value. Press
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
again to acknowledge the alarm. The time of the
to exit the view.
Operating
7.3 Operating the FST020
to go to
53