Powering On The Vsx 3000 Or Vsx 3000A Desktop System; Powering On Set-Top And Component Systems; Configuring With The Setup Wizard - Polycom VSX 3000 Administrator's Manual

Vsx series
Hide thumbs Also See for VSX 3000:
Table of Contents

Advertisement

Administrator's Guide for the VSX Series

Powering On the VSX 3000 or VSX 3000A Desktop System

Powering On Set-top and Component Systems

Configuring with the Setup Wizard

1 - 6
The VSX 3000 and VSX 3000A systems have three power switches.
To power on the VSX 3000 or VSX 3000A:
1. Press the power switch near the connectors on the back of the system.
2. Press the power switch on the lower back corner of the monitor.
3. Press the power button on the front of the monitor.
For set-top systems, the power switch is on the back panel.
For component systems, the power switch is on the front.
When you power on your system for the first time, the setup wizard detects
the system's IP and ISDN connections and leads you through the minimum
configuration steps required to place a call.
The setup wizard allows you to set a room password, which allows you to
limit access to the Admin Settings. The default room password is the 14-digit
system serial number from the System Information screen, the bottom of the
system, or the back of the system.
Make sure you can recall the room password if you set one. If you forget the
password, you will have to reset the system, delete the system files, and run the
setup wizard again in order to access the Admin Settings and reset the password.
If Security Mode is enabled, the room password is required to access the Reset
System screen. If you forget the room password while the system is in Security
Mode, contact your Polycom distributor or Polycom Technical Support.
You can run the setup wizard or view the configuration screens in either of
these two ways.
In the room with the system — Use the remote control to navigate the
screens and enter information. You can use the number pad on the remote
control to enter text just like you can with a cell phone.
From a remote location — Use a web browser to access the system's web
interface.

Advertisement

Table of Contents
loading

Table of Contents