Polycom VSX 3000 Administrator's Manual page 86

Administrator's Guide for the VSX Series
5 - 8
You don't need to change the computer resolutions and you don't need
special cables or hardware, but the computer(s) must meet these
requirements:
— Operating System: Windows 2000, Windows XP Home, or Windows
XP Professional
— Minimum computer: 500 MHz Pentium® III (or equivalent); 256 MB
memory
Recommended computer: 1 GHz Pentium III (or equivalent); 512 MB
memory
Note that, although you use the license key on only one VSX system, you
can install the presenter software on an unlimited number of computers.
• Connect the computer(s) to the IP network.
For information about purchasing the People+Content IP option, please
contact your Polycom distributor.
To enable People+Content IP on a VSX system:
1. On a computer, open a web browser and go to the Polycom web site at
www.polycom.com/support/video.
2. Enter your user login information to enter the web site, or click New User
to create a new account, if needed.
3. Enter the license number you received when you purchased the
People+Content IP option.
4. Enter the serial number of the VSX system onto which you want to install
People+Content IP. You will then receive a People+Content IP software
activation key.
5. Go to System > Admin Settings > General Settings > Options on the
VSX system.
6. Enter the People+Content IP software activation key.
To install the People+Content IP application on a computer:
1. On a computer with Windows XP or Windows 2000, open a web browser
and go to the Polycom web site at www.polycom.com.
2. Select Downloads & Documentation from the Quick Links menu.
3. Under Downloads, select Video as the Category, and select the
appropriate VSX system under Products.
4. Download and install the People+Content IP software.
For information about showing content using People+Content IP, refer to the Getting
Started Guide for the VSX Series at www.polycom.com/videodocumentation.