Positioning Component Systems - Polycom VSX 3000 Administrator's Manual

Administrator's Guide for the VSX Series

Positioning Component Systems

1 - 4
To position the system:
1. The hardware kit you received with the system includes a pair of
self-adhesive feet. If the monitor's chassis slopes back sharply, install the
feet on the bottom of the system to stabilize it.
2. Place the system in the desired location, with the rounded front portion
hanging over the front of the monitor or shelf. Leave enough space to
work, so that you can connect the cables easily.
3. Remove the packaging collar from around the VSX system camera.
The VSX 7000e and VSX 8000 systems are designed to be placed on a tabletop
or in an equipment rack.
If you received a network interface module with your system, you may find it
convenient to install it before positioning the system. Refer to the installation
sheet that you received with the network interface module.
To position the system:
1. Install the mounting brackets on the system if you need to mount it in an
equipment rack, or install the self-adhesive feet if you will place the
system on a table or shelf.
2. Place the system in the desired location. Leave enough space to work, so
that you can connect the cables easily.
3. Place the camera on or near the monitor displaying the far site so that
people look towards the camera during calls.
Feet