Audio; Restart System - Polycom VSX 3000 Administrator's Manual

Audio

Restart System

Diagnostic Screen
Speaker Test
Audio Meter
Diagnostic Screen
Restart System
Description
Tests the audio cable connections. A 473 Hz audio
tone indicates that the local audio connections are
correct.
If you run the test from the system during a call, the
far site will also hear the tone.
If you run the test from the system's web interface
during a call, the people at the site you are testing will
hear the tone, but you will not.
Measures the strength of audio signals from the
system's microphone.
• To check the microphone, speak into the
microphone.
• To check far-site audio, ask a participant at the far
site to speak or call a phone in the far-site room to
hear it ring.
The audio meter should register between 0 and
15 dB.
Description
Cycles power to the system.
When you reset the system using the remote control,
the system's user interface allows you to:
• Keep your system settings (such as system name
and network configuration) or restore factory
settings.
• Keep or delete the directory stored on the system.
You may wish to download the CDR and CDR archive
before you reset the system. See
(CDR) on page 11-6.
Statistics and Diagnostics
Call Detail Report
11 - 5