Information In The Cdr - Polycom VSX 3000 Administrator's Manual

Information in the CDR

To view and download the CDR via the system's web interface:
1. On a PC, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the system's web interface.
3. Enter admin as the user name, and the remote access password, if a
password has been established.
4. Click Utilities > Call Detail Report to view the details of the file.
5. Click Save and then specify a location on your computer to save the file.
As an added security feature, downloading the CDR file with the format
xxx.xxx.xxx.xxx/localcdr.csv requires a username and password in VSX system
software version 8.5.2 and later.
The following table describes the data fields in the CDR.
Data
Row ID
Start Date
Start Time
End Date
End Time
Call Duration
Account Number
Remote System
Name
Call Field Number 1
Call Field Number 2
(If applicable for
call)
Description
Each call is logged on the first available row. A call is a
connection to a single site, so there may be more than one
call in a conference.
The call start date, in the format dd-mm-yyyy.
The call start time, in the 24-hour format hh:mm:ss.
The call end date.
The call end time.
The length of the call.
If Require Account Number to Dial is enabled on the
system, the value entered by the user is displayed in this
field.
The far site's system name.
The number dialed from the first call field, not necessarily
the transport address.
For incoming calls — The caller ID information from the first
number received from a far site.
For outgoing calls — The number dialed from the second
call field, not necessarily the transport address.
For incoming calls — The caller ID information from the
second number received from a far site.
Statistics and Diagnostics
11 - 7