Powering On; Vsx 3000A Desktop System; Powering On Set-Top And Component Systems - Polycom VSX Series Administrator's Manual

Powering On

VSX 3000A Desktop System

Powering On Set-top and Component Systems

To position the system:
1. Install the mounting brackets on the system if you need to mount it in an
equipment rack, or install the self-adhesive feet if you will place the
system on a table or shelf.
2. Place the system in the desired location. Leave enough space to work, so
that you can connect the cables easily.
3. Place the camera on or near the monitor displaying the far site so that
people look towards the camera during calls.
Connect power and power on the system after you have connected the rest of
the equipment that you will use with it.
Do not use any power supply other than the one supplied with your VSX system.
Using the wrong power supply will void the warranty and may damage your system.
The VSX 3000A systems have three power switches.
To power on the VSX 3000A:
1. Press the power switch near the connectors on the back of the system.
2. Press the power switch on the lower back corner of the monitor.
3. Press the power button on the front of the monitor.
For set-top systems, the power switch is on the back panel.
Introducing the VSX Series
1 - 5