Connecting A Visual Concert Vsx To Set-Top Systems - Polycom VSX 3000 Administrator's Manual

Vsx series
Hide thumbs Also See for VSX 3000:
Table of Contents

Advertisement

Connecting a Visual Concert VSX to Set-top Systems

The VSX systems cannot be configured to simultaneously record content and show
it on the VGA output of a VSX 7000e, VSX 8000, or attached Visual Concert VSX.
To configure VCR/DVD audio settings for recording a call:
1. VSX 6000, VSX 7000: Go to System > Admin Settings > Audio >
Audio Settings.
Clear Enable Polycom StereoSurround. When StereoSurround is enabled
on a VSX 6000 or VSX 7000, the system cannot record audio from a call.
2. VSX 6000, VSX 7000: Go to System > Admin Settings > Audio >
Audio Settings > Next > Next.
Set Line Outputs to VCR - Far and Near Audio.
3. VSX 7000s, VSX 7000e, VSX 8000: Go to System > Admin Settings >
Audio > Audio Settings > Next > Next.
Adjust the VCR/DVD Out Level if necessary.
Enable VCR/DVD Audio Out Always On unless you have the VCR/DVD
inputs and outputs both connected to the same device to play and record.
To show material from your computer, you may connect a Visual Concert VSX
unit to any set-top system in the VSX series. Refer to Setting up the Visual
Concert VSX for connection details.
The Quick Tips for Visual Concert VSX provides information for people using
the device in meetings.
Points to note about Visual Concert VSX:
You can use Visual Concert VSX with a Polycom microphone or a
SoundStation® VTX conference phone, but not with both.
You can use Visual Concert VSX with two Polycom microphones if you have a
VSX 7000 or VSX 7000s system.
The Visual Concert VSX and the VSX system require separate LAN
connections. The Visual Concert VSX provides LAN connections for three
computers, including the one sharing content.
You can connect a VGA monitor or projector directly to the Visual Concert VSX.
This lets the people at your site see content from your computer at its original
resolution. The resolution may be reduced if you display it on a VGA monitor
connected to the VSX system.
You will need to set the computer's screen resolution to match the VGA output
of the Visual Concert VSX.
Content and Closed Captions
5 - 3

Advertisement

Table of Contents
loading

Table of Contents