Control Devices; Configuring Remote Control Behavior - Polycom VSX 3000 Administrator's Manual

Control Devices

Configuring Remote Control Behavior

You can customize the behavior of the remote control to support the users'
environment.
To configure remote control behavior:
1. Go to System > Admin Settings > General Settings > System Settings >
Remote Control.
2. Configure these settings:
Setting Description
Keypad Audio Specifies whether to play a voice confirmation of numbers
Confirmation selected with the remote control.
Remote Specifies whether pressing remote control keypad buttons
Control moves the camera to presets or generates DTMF tones. If this
Keypad is set to Presets, users can generate DTMF tones by pressing
Snap Button Specifies alternative uses for the
Option remote control. Choose from Mute Speakers, Calendar,
Recent Calls, System Info, Call Statistics, or Off.
Chinese Virtual
Specifies the type of onscreen keyboard to display for
Keyboard
Simplified Chinese. This setting is only available when the
system's Language is set to Simplified Chinese.
Use Configures the system to accept input from a programmable,
Non-Polycom non-Polycom remote control. In most cases the Polycom
Remote remote works as designed, even when this feature is enabled.
However, try disabling this feature if you experience difficulty
with the Polycom remote. For more information about VSX
system IR codes, refer to the Integrator Reference Manual for
the VSX Series.
on the remote control while on a video screen.
10
Snap button on the
10 - 1