Settings For Non-Polycom Microphones; Settings For Microphones Connected To Balanced Audio Inputs On A; Vsx 8000 System - Polycom VSX 3000 Administrator's Manual

Administrator's Guide for the VSX Series

Settings for Non-Polycom Microphones

Settings for Microphones Connected to Balanced Audio Inputs on a

VSX 8000 System

4 - 16
To configure the VSX system to use microphones connected directly to the RCA
audio inputs:
1. Go to System > Admin Settings > Audio > Audio Settings > Next.
Configure Balanced In:
Set Line Input to Audio Mixer. (except VSX 7000s)
Enable Echo Canceller.
Adjust the audio Level if necessary. You can test this setting using the
Audio Meter.
2. Go to System > Diagnostics > Audio > Audio Meter.
Speak into the microphones that are connected to the audio line inputs.
The audio meter should peak at about 10dB for normal speech.
The Audio screen, where you choose Audio Settings or Stereo Settings, is not
present unless stereo is enabled.
To configure the VSX 8000 system to use microphones connected directly to the
balanced audio inputs:
1. Go to System > Admin Settings > Audio > Audio Settings > Next.
Configure Balanced In:
Set Input type to Microphone.
Select Echo Canceller.
Select Enable Phantom Power to supply power to microphones.
Adjust the audio Level if necessary. You can test this setting using the
Audio Meter.
2. Go to System > Diagnostics > Audio > Audio Meter.
Speak into the microphones that are connected to the balanced audio
inputs. The audio meter should peak at about 10dB for normal speech.
The Audio screen, where you choose Audio Settings or Stereo Settings, is not
present unless stereo is enabled.