Microphones And Speakers; Connecting Polycom Microphones Or A Soundstation Vtx 1000; Connecting Polycom Microphones To Set-Top Or Component Systems - Polycom VSX 3000 Administrator's Manual

Microphones and Speakers

Connecting Polycom Microphones or a
SoundStation VTX 1000

Connecting Polycom Microphones to Set-Top or Component Systems

For best audio, place the microphone or SoundStation VTX 1000:
• On a hard, flat surface (table, wall, or ceiling) away from obstructions, so
the sound will be directed into the microphone elements properly.
• Near the people closest to the monitor.
• In large conference rooms, you may need more than one microphone. If
you are using a SoundStation VTX 1000, you may need to connect its
extension microphones.
To pick up audio from your site, you must connect a microphone or a
SoundStation VTX 1000 conference phone to the system. Refer to your
system's setup sheet for connection details.
You can use a Polycom microphone or a SoundStation VTX 1000 with the system,
but the two may not be used together.
You may place the microphones on the table, or you may mount them to the
ceiling. A ceiling mount kit is available for Polycom microphones.
You can connect two additional Polycom microphones to a VSX 7000,
VSX 7000s, or component VSX system.
4
4 - 1