Polycom VSX 3000 Administrator's Manual page 59

3. Select to go to the Camera Settings screen:
— Specify the name, icon, and format for each video source.
— VSX 6000, VSX 7000, VSX 7000s, VSX 7000e, VSX 8000: Specify
whether secondary camera sources are People or Content. Camera
sources specified as Content are sent at a higher resolution and lower
frame rate.
4. Select to go to the Video Quality screen.
5. Select Motion or Sharpness for the video inputs:
— Motion — This setting is for showing people or other video with
motion.
— Sharpness — The picture will be sharp and clear, but motion will not
be smooth. Choose this setting for document cameras. Sharpness is
available in point-to-point H.263 calls only.
6. Set Pro-Motion Video to specify when to use Pro-Motion for video
inputs set for motion. Pro-Motion provides 50/60 fields per second
interlaced video for TV-like quality at higher bandwidths.
— VSX 3000 and VSX 3000A systems send Pro-Motion video for the
DVD/VCR input only.
— VSX 5000, VSX 6000, and VSX 6000A systems can receive Pro-Motion
video but cannot transmit it.
7. Select to go to the Camera Calibration screen. Only VSX 7000e and
VSX 8000 systems with a PowerCam Plus camera can be calibrated for
automatic camera tracking. Follow the instructions on the screen to
calibrate the camera for automatic camera tracking if it consistently
moves too far in one direction when tracking is enabled. Press
on the remote control so that you can zoom the camera in on your mouth.
For the best calibration results, make sure the camera and system are set up as
described in Configuring Automatic Camera Tracking
Cameras to Component Systems
To configure a second camera:
1. Go to System > Admin Settings > Cameras.
2. VSX 5000, VSX 6000A, VSX 7000, VSX 7000s, VSX 7000e, VSX 8000:
Designate this camera as the primary camera, if desired.
3. VSX 5000, VSX 6000A, VSX 7000, VSX 7000s, VSX 7000e, VSX 8000: Set
Camera Direction to specify which way the camera moves when you
control it with the remote control.
on page
on page 3-11.
Monitors and Cameras
Near
3-14 and Connecting
3 - 13