Calling And Answering; Configuring Call Settings - Polycom VSX 3000 Administrator's Manual

Calling and Answering

Configuring Call Settings

The Call Settings screens provide access to high-level options for the entire
system. For convenience, some of the User Settings options are repeated on
these screens.
To configure call settings:
1. Go to System > Admin Settings > General Settings > System Settings >
Call Settings.
2. Configure these settings on the Call Settings screen:
Setting Description
Allow Mixed IP Specifies whether users can make multipoint calls that
and ISDN Calls include both IP and H.320 sites.
VSX 3000 Clearing this option provides extra security for systems
VSX 3000A requiring LAN connectivity while placing encrypted calls over
VSX 7000 ISDN lines. If you clear this selection, IP systems cannot join
VSX 7000s ISDN calls.
VSX 7000e
VSX 8000
Maximum Time in Enter the maximum number of minutes allowed for call
Call length.
When that time has expired, you see a message asking you
if you want to hang up or stay in the call. If you do not answer
within one minute, the call automatically disconnects. If you
choose to stay in the call at this time, you will not be
prompted again.
Choosing 0 removes any limit.
6
6 - 1