Polycom VSX 3000 Administrator's Manual page 72

Administrator's Guide for the VSX Series
4 - 10
Setting
Enable Polycom
StereoSurround
Enable Live Music
Mode
3. Select and enter VCR/DVD settings for the VSX 7000e system:
Setting Description
VCR/DVD In Level Sets the volume at which the VCR/DVD player plays, relative
to other audio from the system.
VCR/DVD Out Sets the volume at which the call is recorded.
Level
VCR/DVD Audio Allows you to record a call using one VCR or DVD, while
Out Always On playing recorded content into the call from a second VCR or
DVD.
Do not select this setting if you have only one VCR or DVD
player connected. If this setting is disabled, the VCR audio
output is disabled when VCR is the selected camera source.
Description
Specifies that Polycom StereoSurround is used for all calls.
To send or receive stereo audio, make sure your VSX
system is set up as described in
Microphones to Set-Top or Component Systems
4-1 and Connecting Speakers
can receive stereo audio even when it cannot send stereo.
When you use an audio mixer with Echo Canceller enabled,
the stereo input is from the mixer only and the Polycom
microphones are disabled. If Echo Canceller is disabled, the
Polycom microphones are enabled and are added to the
audio from the mixer.
VSX 7000 and VSX 7000e: When you use an audio mixer
with stereo enabled, the microphones are disabled.
VSX 8000: When you use the Balanced In echo canceller
with stereo enabled, the microphones are disabled.
Specifies whether the system transmits audio using a
configuration that best reproduces live music picked up by
microphones.
Note: Noise suppression and automatic gain control are
disabled when this setting is enabled.
Connecting Polycom
on page
on page 4-6. Your system