Polycom VSX 3000 Administrator's Manual page 51

Setting Description
Visual Specifies whether to show content on the Visual Concert™ VSX
Concert VGA display.
Out
VSX 5000
VSX 6000
VSX 6000A
VSX 7000
VSX 7000s
VGA Out Specifies whether to show content on the display connected to
the system's VGA output.
VSX 7000e
VSX 8000
VCR Record Specifies the video source to be recorded to videotape or DVD.
Source
If Far is enabled, the recorded video will switch to the current far
VSX 7000s site speaker. If both Near and Far are enabled, the recorded
VSX 7000e video will switch between near and far sites depending on the
VSX 8000 current speaker. This selection is available only when you are
using a single monitor.
4. Select and configure these settings:
Setting Description
VCR Specifies the VCR/DVD Player output format:
VSX 7000s • S-Video — Select if you have a VCR or DVD player
VSX 7000e connected to the system's S-Video output using an S-Video
VSX 8000 cable.
• Composite — Select if you have a VCR or DVD player
connected to the system output using a composite video
cable.
PIP Specifies PIP (Picture-in-Picture) behavior:
• Camera — The PIP window is displayed when the call is first
connected and when a user moves the camera, uses presets,
or switches to a different camera source.
• On — The PIP window stays on for the duration of the call.
• Off — The PIP window is not displayed during the call.
• Auto — The PIP window is displayed when a user picks up
the remote.
Note: PIP settings are also available in the User Settings screen.
Users can turn the PIP on or off and change its location on the
screen using PIP on the remote control.
Monitors and Cameras
3 - 5