Reciter Disassembly And Reassembly - Tait TB8100 Service Manual

4

Reciter Disassembly and Reassembly

TB8100 Service Manual
© Tait Electronics Limited September 2006
Important
This equipment contains devices which are susceptible to
damage from static charges. Refer to
on page 17
when handling these devices.
This chapter provides information on how to remove and refit the covers
and front and rear panels.
Note
Unless otherwise noted, for the sake of simplicity and clarity, the
instructions and illustrations in this chapter refer to a UHF
(H-band) reciter fitted with an isolated system interface board.
However, the same basic procedures and techniques apply to other
models of reciter and system interface board.
for more information on antistatic procedures
Reciter Disassembly and Reassembly
"ESD Precautions"
99