Figure 18.4 Control Panel Mechanical Assembly - Standard, Power Save, And - Tait TB8100 Service Manual

Figure 18.4 Control panel mechanical assembly - standard, Power Save, and
dual base station
Description
b D-range to Micromatch ribbon cable
c speaker*
d speaker mounting bracket*
e speaker grille cloth*
f volume knob*
g keypad - Power Save
keypad - standard
keypad - dual base station
h chassis
i M3x8mm pan head Torx screw with spring & flat
washers
j M3 hex nut*
1) M3 spring washer*
* not fitted to Power Save control panel
1! control panel board
Note:
The characters XX in an IPN (Tait Internal Part Number)
stand for the issue number of the part. Only the latest
issue of each part will normally be available for ordering
as spare or replacement parts.
Note:
This drawing shows a standard control panel. Any
differences between the standard, Power Save and dual
base station control panels are indicated in the
description of the parts. The multi-reciter control panel is
shown in Figure 18.5 on page 286.
TB8100 Service Manual
© Tait Electronics Limited September 2006
IPN
219-02853-XX
252-00011-XX
302-05266-XX
307-01024-XX
311-01054-XX
311-03115-XX
311-03116-XX
311-03119-XX
316-06820-XX
345-40470-XX
352-00010-08
353-00010-12
1!
j
x2
i
x4
h
d
x2
1)
x2
c
e
b
i
x2
Control Panel Servicing
f
g
285