Module Indicator Leds And Switches; Reciter - Tait TB9400 Installation And Operation Manual

DRAFT 4
3.2

Module Indicator LEDs and Switches

Additional status information is displayed by LEDs in individual modules.
The PMU also has switches that let you turn the AC and DC modules off.
3.2.1

Reciter

The indicator LEDs on the front of the reciter are visible through a slot in
Front View
its front panel.
Figure 3.2 Indicator LEDs on the front of the reciter
b
indicator LEDs
These LEDs provide the following information about the state of the reciter:
■
■
40 Operation
steady green - the reciter is powered up
flashing red - one or more alarms have been generated; you can use the
web interface to find out more details about the alarms.
b
TB9400 Installation and Operation Manual
© Tait Electronics Limited September 2011