Figure 19.3 Cable Identification - Sheet 1 - Tait TB8100 Service Manual

Figure 19.3 Cable identification - sheet 1
Description
b
RF coaxial cable - reciter to 5/50W PA (long)
c RF coaxial cable - reciter to 5/50W PA (short)
d RF coaxial cable - reciter to 100W PA
(replaced by 219-02859-XX in July 2006)
e system control bus ribbon cable - reciter to subrack
interconnect board
f system control bus ribbon cable - 5/50W PA to
subrack interconnect board
g system control bus ribbon cable - PMU and 5/50W
PA to subrack interconnect board
h system control bus ribbon cable - PMU and 100W
PA to subrack interconnect board
(replaced by 219-02857-XX in July 2006)
i system control bus ribbon cable - 5/50W 12V PA
(PA1) to subrack interconnect board
j DC power cable - PMU to single reciter
(replaced by 219-02860-XX in July 2006)
1) DC power cable - PMU to dual reciters
Note:
The characters XX in an IPN (Tait Internal Part Number)
stand for the issue number of the part. Only the latest
issue of each part will normally be available for ordering
as spare or replacement parts.
TB8100 Service Manual
© Tait Electronics Limited September 2006
IPN
219-02859-XX
1)
219-02862-XX
219-02864-XX
b
219-02858-XX
219-02861-XX
g
219-02857-XX
219-02863-XX
dual 5/50W base station - front view
219-02983-XX
219-02856-XX
219-02860-XX
j
h
single 100W base station - front view
b
i
dual 5/50W 12V PA base station - front view
c
e
f
e
d
c
e
f
Subrack Servicing 291