Tait TB8100 Service Manual page 171

Table 8.6 Supply current specifications
Test
Supply Current - 12V PA
Standby
Transmit
5W PA at 5W
50W PA at 50W
Supply Current - 28V PA
Standby
Transmit - B, C and H Bands
5W PA at 5W
50W PA at 50W
100W PA at 100W
Transmit - K and L Bands
5W PA at 5W
50W PA at 50W
100W PA at 100W
a. measured at 12.5VDC input
b. into a 50Ω load
c. 50W model unavailable in L band
TB8100 Service Manual
© Tait Electronics Limited September 2006
Note
The information in this table is extracted from the TB8100 Spec-
ifications Manual. Refer to the latest issue of this manual
(MBA-00001-xx) for the most up-to-date and complete specifi-
cations.
a
b
b
c
Limits
Maximum Typical
200mA 165mA
1.5A 1.2A
10.2A 9.2A
Maximum Typical
50mA 42mA
600mA 530mA
5A 4.2A
10A 8.3A
600mA 530mA
5A 4.2A
11A 8.5A
Power Amplifier Fault Finding 171