Power Amplifier Disassembly And Reassembly - Tait TB8100 Service Manual

9 Power Amplifier Disassembly and
Reassembly
TB8100 Service Manual
© Tait Electronics Limited September 2006
Caution
Touching high-power RF components or circuits
can cause serious burns. We strongly recommend
you do not touch any RF components or tracks in
the PA while it is transmitting.
Caution
The TB8100 power amplifier (PA) weighs between
4.8kg (10.6lb) and 5.8kg (12.8lb). Take care when
handling the PA to avoid personal injury.
Important
This equipment contains devices which are susceptible to
damage from static charges. Refer to
on page 17
when handling these devices.
This chapter provides information on how to remove and replace the airflow
duct, cover, and front panel.
Note
Unless otherwise noted, the instructions and illustrations in this
chapter refer to a 100W UHF (H-band) PA. However, the same
basic procedures and techniques apply to other models of PA.
for more information on antistatic procedures

Power Amplifier Disassembly and Reassembly

"ESD Precautions"
173