Figure 8.4 Recommended Test Equipment Set-Up For Initial Checks - 12V Pa - Tait TB8100 Service Manual

Figure 8.4 Recommended test equipment set-up for initial checks - 12V PA
12.5VDC
system control bus
connected within subrack
12V PA DC input connector
The matching socket for this connector is
available as part number 240-00022-11
(Phoenix MVSTBR2.5HC/2-ST/5.08 female).
TB8100 Service Manual
© Tait Electronics Limited September 2006
Load
RF Power
Meter
RF
RF
12V PA Reciter
DC
Dual Base Station
Subrack Interconnect
Board
Control
Panel
RS-232
PC
system interface
CTU
10-32VDC
Power Amplifier Fault Finding 135