Identifying The Control Panel; Screw Torque Settings - Tait TB8100 Service Manual

18.1

Identifying the Control Panel

18.2

Screw Torque Settings

278 Control Panel Servicing
You can identify the model of control panel by referring to the product code
printed on a label on the side of the chassis. The product codes are
explained in the table below.
a
Product Code
TBA2010
XBA2010
TBA2020
XBA2020
TBA2040
XBA2040
XBA2060
a. Some control panels were labelled as "TBA20XX" when sold as separate modules,
and "XBA20XX" when sold as part of a base station. This is only a labelling differ-
ence. For example, a control panel labelled TBA2020 is the same as one labelled
XBA2020.
The recommended torque settings for the screws and nuts used in the
control panel are as follows:
Location / Function
securing the circuit board
securing the D-range connector
securing the speaker clamps
Description
power save
standard
dual base station
multi-reciter
Torque
0.5N·m / 4.5lbf·in
0.5N·m / 4.5lbf·in
© Tait Electronics Limited September 2006
Driver/
Spanner Size
T10 M3
5.5mm AF M3
TB8100 Service Manual