Module Indicator Leds And Switches; Reciter And Receiver - Tait TB9400 Installation And Operation Manual

3.2

Module Indicator LEDs and Switches

3.2.1

Reciter and Receiver

Front View
Figure 3.2 Indicator LEDs on the front of the reciter and receiver
Reciter
indicator LEDs
b
TB9400 Installation and Operation Manual
© Tait International Limited November 2019
Additional status information is displayed by LEDs in individual modules.
The PMU also has switches that let you turn the AC and DC modules off.
The indicator LEDs on the front of the reciter or receiver are visible
through a slot in its front panel.
These LEDs provide the following information about the state of the reciter
or receiver:
steady green - the reciter or receiver is powered up
■
flashing red - one or more alarms have been generated; you can use the
■
web interface to find out more details about the alarms.
b
Receiver
Operation 45