Power Management Unit Spare Parts - Tait TB8100 Service Manual

16

Power Management Unit Spare Parts

TB8100 Service Manual
© Tait Electronics Limited September 2006
This section lists the spare parts available for the TB8100 PMU at the time
this manual was published.
Spare modules and circuit board assemblies are listed in
Mechanical parts are listed in
on page 270.
Other items may become available as spares at a later date. Consult your
nearest Tait Dealer or Customer Service Organisation regarding the
availability of specific items.
Table 16.1 Spare modules and circuit boards for the PMU
Description
a
AC module
b
DC module
standby power supply card
auxiliary power supply board
c
DC output filter board
d
DC microprocessor card
a. Comes complete with PFC control card and HVDC control and microprocessor card.
b. Comes complete with battery control card and DC control card.
c. This is the AC converter board as used in a DC PMU. Only the current sense and out-
put filter circuitry is placed on this board.
d. This is the HVDC control and microprocessor card as used in a DC PMU. Only the
feedback and microprocessor circuitry is placed on this card.
Figure 16.1 on page 269
12VDC
24VDC
48VDC
12VDC
24VDC
48VDC
12VDC
24VDC
48VDC
Power Management Unit Spare Parts
Table 16.1.
and Figure 16.2
Spares Code
TBA-SP-WAA0
TBA-SP-WD10
TBA-SP-WD20
TBA-SP-WD40
TBA-SP-WDS1
TBA-SP-WDS2
TBA-SP-WDS4
TBA-SP-WDA1
TBA-SP-WDA2
TBA-SP-WDA4
TBA-SP-WA00
TBA-SP-WAH0
267