Tait TB8100 Service Manual page 287

19 Subrack Servicing
TB8100 Service Manual
© Tait Electronics Limited September 2006
This chapter lists the spare parts available for the TB8100 subrack at the time
this manual was published.
Spare subrack assemblies are listed in
Mechanical parts and cables are listed as follows:
Figure 19.1 on page 289
the front panel assembly
Figure 19.2 on page 290
the subrack assembly
Figure 19.3 on page 291
cables used in single and dual base stations
Figure 19.5 on page 293
used in the multi-reciter subrack.
Other items may become available as spares at a later date. Consult your
nearest Tait Dealer or Customer Service Organisation regarding the
availability of specific items.
Table 19.1 Spare subrack assemblies
Description
subrack (complete with guide rails and retaining clamps)
front panel (no fans or labels)
front panel (complete with fans; no labels)
front panel (PA fan only; no labels)
front panel (PMU fan only; no labels)
subrack interconnect board
Table 19.1.
identifies the mechanical parts used in
identifies the mechanical parts used in
and Figure 19.4 on page 292
identifies the cables and mechanical parts
single base station
dual base station
multi-reciter
Subrack Servicing
identify the
Spares Code
TBA-SP-RACK
TBA-SP-F2130
TBA-SP-F2132
TBA-SP-F2135
TBA-SP-F2136
TBA-SP-K22C0
TBA-SP-K22C2
TBA-SP-K22C6
287