Erase User Data; Service Diagnostics - Agilent Technologies FieldFox N9912A User Manual

NOTE To make the LAN settings persist after power up, toggle Apply Settings to Now
then back to Power Up. You should see a message indicating that the LANconfig
file was saved.
 Press

Service Diagnostics

 The Service diagnostics menu is generally used to display service-related
System Information
The System information table shows important information about your FieldFox.
The following is the most useful information:
 Model Number – FieldFox model
 Serial Number – Identification number of your FieldFox
 Firmware Release – The currently installed version of software. Check to see
 Network Identity – The network name and current IP address of your
Error Log
The Error Log shows the information that has appeared on the FieldFox screen.
The most recent information is at the top of the table.
Press
Battery
Learn about this table on page 154.
Internal Temperatures
Learn all about this table and the importance of the internal FieldFox
temperatures on page 12.

Erase User Data

All data that you have written to the FieldFox can be erased with the press of a
button. You would do this if your FieldFox is located in a secure environment
and must be routinely erased of sensitive data.
152
Static Gateway - Enter the Static Gateway – including periods - in the
o
format nnn.nnn.nnn.nnn
Apply Settings Choose from:
o
o Power Up The above settings take effect when the FieldFox is started.
o Now The above settings take effect immediately.
when finished.
Done Edit
information. To access these menu items, press System 7 then
Diagnostics.
if you have the latest firmware at:
FieldFox.
to erase this information.
Clear Errors
http://na.tm.agilent.com/fieldfox/
N9912A FieldFox User's Guide
Service