Draytek Vigor2926L User Manual page 920

status
show
mac add [index addr]
mac clear/disable/enable
[index/all]
flush
E E x x a a m m p p l
> wl wds status
Please enable WDS hello function first.
> wl wds hello 1
% <Note> Please restart router after you set the parameters.
> wl wds status
T e l n e t C o m m
T e l n e t C o m m
This command allows users to configure AP client mode for wireless connection (2.4GHz).
S y n t a x
S y n t a x
wl apcli show
wl apcli enable [1/0]
wl apcli security [mode]
wl apcli ssid [ssid_name]
wl apcli bssid [mac address]
S S y y n n t t a a x x
Parameter
how
s
enable [1/0]
security [mode]
904
It means to display WDS link status for 2.4GHz connection.
It means to display current WDS settings.
add [index addr] – Add the peer MAC entry in Repeater/Bridge WDS
MAC table.
clear/disable/enable [index/all]- Clear, disable, enable the
specifed or all MAC entries in Repeater/Bridge WDS MAC table. e.g,
It means to reset all WDS setting.
l e e
a n d : w l a p c l i
a n d : w l a p c l i
D D e e s s c c r r i i p p t t i i o o n n
Description
Display current status of wireless AP client.
It means to enable wireless 2.4GHz AP client mode.
1 – enable
0 – disable
There are several modes to be selected:
Disable – disable the security settings.
wpapsk [key] – WPA Pre-shared Key will be used. Keys must start
wpa2psk [key] – WPA2 Pre-shared Key will be used. Keys must start
wpamixpsk [key] – WPA Mixed Pre-shared Key will be used. Keys
wep [key] [index] – WEP key will be used. You need to type the key
0 – disable the function.
wl dual wds mac enable 1
with 0x to be identified as a Hexadecimal number key.
WPA keys must be in 8~63 ASCII string or 64
Hexadecimal digit format.
with 0x to be identified as a Hexadecimal number key.
WPA keys must be in 8~63 ASCII string or 64
Hexadecimal digit format.
must start with 0x to be identified as a Hexadecimal
number key. WPA keys must be in 8~63 ASCII string or
64 Hexadecimal digit format.
Vigor2926 Series User's Guide