Vii-1-7 Syslog/Mail Alert - Draytek Vigor2926L User Manual

2. Click Choose File button to choose the correct configuration file for uploading to the
router.
3. Click Restore button and wait for few seconds, the following picture will tell you that
the restoration procedure is successful.
V I I - 1 - 7 S
V I I - 1 - 7 S
SysLog function is provided for users to monitor router.
Available settings are explained as follows:
Item
SysLog Access Setup
Router Name
438
y s l o g / M a i l A l e r t
y s l o g / M a i l A l e r t
Description
Enable - Check Enable to activate function of syslog.
Syslog Save to – Check Syslog Server to save the log to Syslog
server.
Check USB Disk to save the log to the attached USB storage
disk.
Display the name for such router configured in System
Maintenance>>Management.
If there is no name here, simply lick the link to access into
System Maintenance>>Management to set the router name.
Server IP Address / Hostname -The IP address of the Syslog
server.
Destination Port - Assign a port for the Syslog protocol.
Mail Syslog – Check the box to recode the mail event on
Syslog.
Enable syslog message - Check the box listed on this web
page to send the corresponding message of firewall, VPN,
User Access, Call, WAN, Router/DSL information to Syslog.
Vigor2926 Series User's Guide