Draytek Vigor2926L User Manual page 828

T e l n e t C o m m
T e l n e t C o m m
This command allows users to enable or disable IPSec ESP tunnel passthrough and IKE source
port (500) preservation.
S y n t a x
S y n t a x
srv nat ipsecpass [options]
S y n t a x
S y n t a x
Parameter
[options]
on
off
status
E x a m p l
E x a m p
> srv nat ipsecpass status
%% Status: IPsec ESP pass-thru and IKE src_port:500 preservation is
OFF.
T e l n e t C o m m
T e l n e t C o m m
This command allows users to set open port settings for NAT server.
S y n t a x
S y n t a x
srv nat openport n m [-<command> <parameter> | ... ]
S y n t a x
S y n t a x
Parameter
n
m
[<command>
<parameter>|...]
-a <enable>
-c <comment>
-i <local ip>
-w <idx>
-p <protocol>
812
a n d : s r v n a t i p s e c
a n d : s r v n a t i p s e
D e s c r i p t i o n
D e s c r i p t i o n
Description
The available commands with parameters are listed below.
It means to enable IPSec ESP tunnel passthrough and IKE source port
(500) preservation.
It means to disable IPSec ESP tunnel passthrough and IKE source
port (500) preservation.
It means to display current status for checking.
e
l e
a n d : s r v n a t o p e n
a n d : s r v n a t o p e n
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means the index number for the profiles. The range is from 1 to
20.
It means to specify the sub-item number for this profile. The range
is from 1 to 10.
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
It means to enable or disable the open port rule profile.
0: disable
1:enable
It means to type the description (less than 23 characters) for the
defined network service.
It means to set the IP address for local computer.
Local ip: Type an IP address in this field.
It means to specify the public IP.
1: WAN1 Default,
2: WAN1 Alias 1,
...and so on.
Specify the transport layer protocol.
Available values are TCP, UDP and ALL.
p a s s
c p a s s
p o r t
p o r t
Vigor2926 Series User's Guide