Draytek Vigor2926L User Manual page 19

Interface
Factory Reset
LAN1~LAN5
WAN1~WAN2
USB1~USB2
PWR
ON/OFF
SIM Card Slot
Vigor2926 Series User's Guide
Switch on Rear Side
Description
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Connecters for local network devices.
Connecter for local network devices or modem for accessing Internet.
Connector for a USB device (for 3G/4G USB Modem or printer or
Environmental Thermometer).
Connecter for a power adapter.
Power Switch.
Connector for a SIM card.
(Jack for LTE device)
3