Draytek Vigor2926L User Manual page 876

-h [enable]
-i [enable]
-p [enable]
-P [enable]
-H [enable]
-t [val]
-u UAValue
-D [disable]
-v
voip sip nat - Allows users to set NAT Traversal Setting.
-s [server]
-t [sec]
-i [ip]
-v
E x a m p l
E x a m p
> voip sip misc -t 1
includes User-Agent header
> voip sip misc -u 91704688carrie
user-defined User-Agent:91704688carrie
> voip sip acc 1 -P carrie_1 -r 1 -d 172.16.3.133
> voip sip acc 1 -t 30
> voip sip misc -h 1
> voip sip acc 1 -v
index
profile
860
1 - enable
Enable/disable call hold mode based on protocol RFC2543 (0:
disable, 1:enable).
Enable CODEC change without Re-INVITE.
0 - disable
1 - enable
Enable PRACK message.
0 – Not support PRACK.
1 – Support PRACK.
Enable IP Call.
0 – Disable IP call.
1 – Enable IP call.
SIP INFO packet will be sent out when encounting hook flash event.
0 - disable
1 - enable
Set the mode of User-Agent (e.g., phone, software, and device) for
SIP packet.
0 - Hide SIP header "User-Agent".
1 - Show SIP header "User-Agent".
2 - Use default "User-Agent" value.
3 - Use user-defined "User-Agent" value.
For every SIP user agent identifies itself with a string, this command
allows you to set the value (e.g, IP address, phone number, e-mail
address) of User-Agent. The length of the string must be less than
64 characters.
Disable VoIP Service.
1 – disable VoIP service.
0 – enable VoIP service.
System will automatic reboot to activate voip service
View current status for miscellaneous settings.
Set the IP address for STUN server.
Set ping interval for SIP account.
Sec – 6 ~ 600
Indicate external IP address.
View current settings for SIP NAT.
e
l e
: 1
: carrie_1
Vigor2926 Series User's Guide