Draytek Vigor2926L User Manual page 910

-a [0/1]
-m [1~10]
-s [1~10]
E x a m p l
E x a m p
> hsportal info -e 1
Enabled database to record information ... [OK]
> hsportal info -a 1
Enabled auto backup and start a new record for user information ... [OK]
T e l n e t C o m m
T e l n e t C o m m
This command allows the user to configure wireless access control settings.
S y n t a x
S y n t a x
wl acl enable [ssid1 ssid2 ssid3 ssid4]
wl acl disable [ssid1 ssid2 ssid3 ssid4]
wl acl add [MAC] [ssid1 ssid2 ssid3 ssid4] [isolate]
wl acl del [MAC]
wl acl mode [ssid1 ssid2 ssid3 ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clean
S y n t a x
S y n t a x
Parameter
enable [ssid1 ssid2 ssid3
ssid4]
disable [ssid1 ssid2 ssid3
ssid4]
add [MAC] [ssid1 ssid2 ssid3
ssid4] [isolate]
del [MAC]
mode [ssid1 ssid2 ssid3
ssid4] [white/black]
wl acl show
wl acl showmode
894
0 - disable
1 – enable
Enable auto backup and start a new record for user information.
0 - disable
1 – enable
Set email notigication object.
[1~10]- Index number of object profile.
Set SMS notigication object.
[1~10]- Index number of object profile.
e
l e
a n d : w l a c l
a n d : w l a c l
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to enable the settings for SSID1, SSID2, SSID3 and SSID4.
It means to disable the settings for SSID1, SSID2, SSID3 and SSID4.
It means to associate a MAC address to certain SSID interfaces'
access control settings. The isolate setting will limit the wireless
client's network capabilities to accessing the wireless LAN only.
[MAC] format: xx-xx-xx-xx-xx-xx
It means to delete a MAC address entry defined in the access
control list.
It means to set white/black list for each SSID.
It means to show access control status.
It means to show the mode for each SSID.
or xx:xx:xx:xx:xx:xx
or xx.xx.xx.xx.xx.xx
Vigor2926 Series User's Guide