Draytek Vigor2926L User Manual page 935

> wl_dual drayrs show
% Mode : Strictly Minimun RSSI
% rs_low
% rs_low_secure
% delta
T e l n e t C o m m
T e l n e t C o m m
This command allows you to configure detailed settings for RADIUS server
S y n t a x
S y n t a x
radius enable [0/1]
radius authport [port number]
radius set_auth_method [method idx]
radius client [add] [idx] -i [address] -m [mask] -p [prefix] -l [length] -s [secret]
radius client [del] [idx]
radius show
radius set_dot1x_phase1 -e [method_idx]
radius set_dot1x_phase1 -d [method_idx]
radius set_dot1x_phase2 -e [method_idx]
radius set_dot1x_phase2 -d [method_idx]
S y n t a x
S y n t a x
Parameter
enable[0/1]
authport [port number]
set_auth_method [method
idx]
client add
client [del] [idx]
show
enable_dot1x [0/1]
set_dot1x_phase1
[method_idx]
set_dot1x_phase2
Vigor2926 Series User's Guide
: -68
: -66
: 2
a n d : r a d i u s
a n d : r a d i u s
D e s c r i p t i o n
D e s c r i p t i o n
Description
Enable (1) or disable (0) the RADIUS server.
Configure the port number for authentication.
Port number: Available range is from 0 to 65535.
Default value is "1812".
Specify which method will be used for authentication.
Method idx: "0" is "Only PAP"; "1" is
"PAP/CHAP/MS-CHAP/MS-CHAPv2".
Specify a client to be authenticated by RADIUS server by typing
required information as follows:
-i [address]: client IPv4 address(domain)
-m [mask]: client IPv4 mask
-p [prefix]: client IPv6 prefix
-l [length]: client IPv6 prefix length
-s [secret]: shared secret
ex: radius client add 1 -i 192.168.1.1 -m 255.255.255.0 -s 123
del - Delete related settings for selected client.
Idx - Specify the index number of client profiles.
Display the status of RADIUS server.
Enable (1) or disable (0) the 802.1X Authentication function of
RADIUS Server. Default is disabled.
Set the phase1 method for 802.1X authentication of RADIUS server.
method_idx - Specify which method will be used.
At present, dot1x_phase1 can only support PEAP now. So only "1"
can be used for it.
Set the phase2 method for 802.1X authentication of RADIUS server.
919